small wheel loaders
Model No. : ZL10
small wheel loaders Description:
Wheel Loader Safety Precautions for Use
1.The general safety precautions
① The drivers and related staff must carefully read the manual of maintenance and use and the operation manual supplied by the manufacturer before using the wheel loaders. Please do that according to requirements in the manual. Otherwise, it will bring you serious effect and unnecessary losses.
② The drivers should wear enough to meet the safety requirements, and to wear the necessary protective equipment.
③ If you drive in a smaller range or danger area, there must be warning signs within its scope or danger point.
④ The drivers are absolutely forbidden to driving the wheel loader after drinking or fatigue.
⑤ When you do maintenance or inspection work in the central hinged area, you should install the "anti-rotation bar" to prevent the front and rear frame relatively rotating.
⑥ After the wheel loader is stopped completely, please get on or off from it. Please do not jump up and down when the loader is being operating or working.
⑦ When you repair the wheel loader and need to raise the arm, please keep the pad firmly to ensure the arm would never fall in any case.
1.0 Engine Details
(1) Model: Changgong CG28
(2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine
(3) Rated Power: 18.02KW
(4) Rated Speed: 2200 r/min (rpm)
2.0 Steering System
(1) Cycloid full hydraulic steering system: BZZ-200
(2) System Pressure: 16MPa
(3) Steering Cylinder: Φ75xΦ63x280
3.0 Bucket
(1) Bucket Capacity: 0.4m3
(2) Bucket width: 1300mm
(3) Max. Breakout Force: 22KN
(4) Rated Load: 1000kg
(5) Operating Weight: 2320kg
4.0 Overall Dimensions
((1) Overall Length (Bucket on ground position): 4500mm
(2) Overall Height
(a) Ground to Cab Top: 2400mm
(b) Ground to exhaust pipe: It is below from the top of cabin
(3) Overall Width: 1600mm
5.0 Operating Specifications
(1) Drive Means: Four-wheel drive
(2) Min Turning Radius: 4200mm
(3) Driving System: mechanical
(4) Dumping Height: 2700mm
(5) Dumping Reach at max height: 700mm
(6) Min the ground distance: 240mm
(7) Time of raise:3.05sec.
(8) Hydraulic cycle time: 12.5second.
6.0 Brake System
(1) Service Brake: Four Wheel Hydraulic spread-shoed brake
7.0 Tyre
(1) Model: 8.25-16 (2) Width: 20cm (3) Diameter: 80cm
8.0 Wheelbase: 2040mm
9.0 Track: 1320mm
